Xinje VH Series Inverter Range

Xinje organises its inverter range across three tiers — VH1 (economy), VH5 (general-purpose), and VH6 (full-function closed-loop) — covering 0.4 kW to 90 kW across three-phase 380 V supply voltage.

VH1 — Economy Open-Loop Vector

The Xinje VH1 is designed for straightforward variable speed control of fans, pumps, and light conveyors where the priority is lowest acquisition cost. The VH1 uses open-loop vector (sensorless) control with auto-tuning, RS-485 Modbus RTU communication, and a compact form factor.

Key specifications: 0.4–7.5 kW (three-phase 380 V), V/f and open-loop vector modes, RS-485 Modbus RTU, built-in braking transistor (≤7.5 kW), LED parameter display. No encoder feedback card option.

The VH1 is the correct choice when the application is a standard pump or fan drive where energy saving and basic speed control are the goals — and where budget is the primary constraint.

• VH1-3P-0.4K: 0.4 kW, three-phase 380 V. Priced from approximately RM 250 – RM 400.
• VH1-3P-2.2K: 2.2 kW, three-phase 380 V. Priced from approximately RM 450 – RM 750.
• VH1-3P-7.5K: 7.5 kW, three-phase 380 V. Priced from approximately RM 1,200 – RM 2,000.

VH5 — General Open-Loop Vector

The Xinje VH5 is the mid-range tier — higher current overload capability than VH1, improved low-frequency torque output, and a wider power range covering applications from conveyors to compressor drives. VH5 supports both V/f and sensorless vector control modes with auto-tune.

The VH5 is specified for Malaysian machine builder projects where performance requirements exceed the VH1 (starting torque, low-speed operation at high load) but closed-loop feedback is not required.

VH6 — Full-Function Closed-Loop Vector

The Xinje VH6 is the highest-performance Xinje inverter — supporting V/f control, open-loop vector, and closed-loop vector control with optional encoder feedback card. Closed-loop speed regulation achieves ±0.02% of set speed; torque control accuracy reaches ±3% of rated torque. The VH6 handles applications that, in other brand lines, would require a premium drive: winding and unwinding machines, speed-synchronized conveyor lines, hoists, and crane drives.

At 90 kW maximum power, the VH6 covers the full range from small machine axes to large industrial drives.

• VH6-3P-2.2K: 2.2 kW, open-loop and closed-loop vector. Priced from approximately RM 700 – RM 1,200.
• VH6-3P-7.5K: 7.5 kW, closed-loop vector, encoder card option. Priced from approximately RM 2,000 – RM 3,500.
• VH6-3P-22K: 22 kW. Priced from approximately RM 5,000 – RM 8,000.
• VH6-3P-45K: 45 kW. Priced from approximately RM 10,000 – RM 15,000.

Xinje VH Series Comparison

Feature	VH1	VH5	VH6
Control mode	V/f, open-loop vector	V/f, sensorless vector	V/f, open-loop, closed-loop vector
Encoder feedback	No	No	Optional card
Max power	7.5 kW	45 kW	90 kW
Starting torque	150% at 3 Hz	180% at 0.5 Hz	200% at 0 Hz (closed-loop)
RS-485 Modbus RTU	✓	✓	✓
CANopen (option)	No	No	Optional
Price (2.2 kW)	RM 450 – RM 750	RM 600 – RM 1,000	RM 700 – RM 1,200

 

Xinje VFD Price Guide — Malaysia (MYR)

Model	Power	Series	Price (MYR)
VH1-3P-0.4K	0.4 kW	Economy	RM 250 – RM 400
VH1-3P-2.2K	2.2 kW	Economy	RM 450 – RM 750
VH1-3P-7.5K	7.5 kW	Economy	RM 1,200 – RM 2,000
VH6-3P-2.2K	2.2 kW	Full-function	RM 700 – RM 1,200
VH6-3P-7.5K	7.5 kW	Closed-loop vector	RM 2,000 – RM 3,500
VH6-3P-22K	22 kW	Closed-loop vector	RM 5,000 – RM 8,000
VH6-3P-45K	45 kW	Closed-loop vector	RM 10,000 – RM 15,000

 

*Contact Flextech Industrial for current pricing. Availability varies by model.*

Xinje Inverter and Xinje PLC Integration

Xinje VH series inverters integrate natively with Xinje XD and XL series PLCs via RS-485 Modbus RTU — sharing the same communication protocol and parameter structure for straightforward commissioning. In a Xinje-native automation panel, the XD series PLC reads VH inverter output frequency, motor current, and fault status, and writes speed setpoint and run/stop commands over a single RS-485 bus.

For Malaysian system integrators using Mitsubishi, Omron, or Panasonic PLCs, the Xinje VH inverter's standard Modbus RTU implementation is fully compatible — any Modbus master can address the VH series using its published register map.

Flextech Industrial stocks both Xinje XL3/XL5E PLCs and Xinje VH1/VH6 inverters for complete Xinje ecosystem sourcing in Malaysia.

Xinje Inverter in Malaysian Industry

SME Manufacturing (Nationwide): Xinje VH1 inverters are the entry-level choice for Malaysian SME workshops and small manufacturing lines — legitimate, ISO-certified Chinese industrial drives that offer significantly better long-term reliability than uncertified grey-market alternatives at similar price points.

Conveyor and Material Handling (Selangor, Johor): Xinje VH6 closed-loop vector drives handle speed-synchronised multi-conveyor systems and precision accumulation conveyors where open-loop slip causes belt drift during load changes.

Textile and Winding (Selangor, Perak): VH6 with encoder card provides the tension control accuracy required for yarn winding and film rewinding equipment — matching the performance of drives at twice the price from premium Japanese brands.

NIMP 2030 Factory Upgrades: Malaysian SME factories replacing direct-on-line starters with Xinje VH inverters under the Smart Automation Grant (SAG) programme benefit from the VH series' Modbus RTU connectivity requirement for SAG network compliance.

Top Xinje Inverter Models at Flextech Industrial

• Xinje VH1-3P-2.2K— economy open-loop vector, 2.2 kW, three-phase 380 V, Modbus RTU. Best value entry drive.
• Xinje VH6-3P-2.2K— full-function, closed-loop vector optional, 2.2 kW.
• Xinje VH6-3P-7.5K— 7.5 kW, closed-loop vector, encoder card option, for demanding conveyor and winding.
• Xinje VH6-3P-22K— 22 kW, industrial-grade closed-loop vector.
• Xinje VH6-3P-45K— 45 kW, heavy-duty conveyor and compressor drives.

Frequently Asked Questions

Is Xinje a reliable inverter brand for Malaysian factories?

Xinje (Wuxi Xinje Electric Co., Ltd.) is an ISO 9001-certified Chinese industrial automation manufacturer with over 20 years of production history and dedicated regional distribution in Malaysia (xinje.com.my). Xinje VH series inverters meet CE and RoHS standards. Flextech Industrial sources Xinje products through authorised channels — not grey-market supply. For factories that require Japanese brand assurance, Mitsubishi and Panasonic inverters are the alternative at higher price points.

What is the difference between Xinje VH1 and VH6?

The VH1 is the economy tier — V/f and basic open-loop vector control, maximum 7.5 kW, no encoder feedback option. The VH6 is the full-function tier — V/f, open-loop vector, and closed-loop vector (with optional encoder card), maximum 90 kW, higher starting torque (200% at 0 Hz in closed-loop mode). For standard conveyor and fan applications, VH1 is sufficient. For winding, hoists, speed-synchronised conveyors, and precision drives, specify VH6.

What is the price of Xinje VH1 inverter in Malaysia?

Xinje VH1 inverters in Malaysia are priced from approximately RM 250 (0.4 kW) to RM 2,000 (7.5 kW). The VH1 2.2 kW model — the most commonly ordered size — is approximately RM 450 – RM 750. Contact Flextech Industrial for current MYR pricing and stock availability.

Can I control a Xinje VH inverter with a Mitsubishi FX5U PLC?

Yes. Connect the Xinje VH inverter RS-485 terminals (RJ45 or terminal block depending on model) to the Mitsubishi FX5U's built-in RS-485 port. Set the VH inverter communication address (F0.00), baud rate (F0.01), and protocol parameters (F0.02). On the FX5U, use the Modbus Simple Communication instruction (ADPRW) to write to Xinje VH frequency command and run/stop registers. The VH register map is published in the Xinje VH series user manual.

Where can I buy Xinje inverters in Malaysia?

Flextech Industrial in Puchong, Selangor stocks genuine Xinje VH1 and VH6 inverters with same-day quotation. We also stock Xinje XL series PLCs and TS3 HMIs for complete Xinje system sourcing. Contact our team for current inventory and MYR pricing.

*Flextech Industrial Supplies — Puchong, Selangor, Malaysia. Genuine Xinje VH series inverters — VH1, VH6. Fast quotation for all power ratings.*