MITSUBISHI FR-PU07

Flextech Industrial Supplies stocks the Mitsubishi FR-PU07 in Puchong, Selangor, with same-day Klang Valley dispatch on available units. The FR-PU07 is a mandatory commissioning tool for Malaysian machine builders and system integrators working with FREQROL inverters that ship without a front-panel keypad (certain FR-D700 frame sizes ship without built-in PU07 as default), and a critical maintenance spare for Malaysian plants where inverter parameter backup before failure is part of preventive maintenance practice.

FR-PU07 Key Specifications

Technical Features

Parameter copy function: The FR-PU07 reads the complete parameter table from a connected FREQROL inverter into on-board non-volatile memory in a single copy operation. Stored parameters persist without power. The stored parameter set can then be written to any compatible FREQROL unit of the same series – enabling pre-loaded replacement inverter dispatch and eliminating parameter re-entry on site for Malaysian plant maintenance teams managing multiple identical inverter installations.

Real-time monitoring: FR-PU07 displays output frequency (Hz), output current (A), output voltage (V), motor speed (rpm – calculated), and inverter status flags simultaneously. Fault history stores the last 8 fault codes with operating state at time of fault – essential for Malaysian maintenance engineers diagnosing intermittent inverter trips on production machines.

Remote mounting: FR-PU07 connects to the inverter PU port via standard RJ45 modular cable (not supplied) up to 20 m distance. Remote mounting to a panel door cutout (using FR-PU07 front panel mounting kit) places the keypad at operator access height, keeping the inverter in a drive cabinet not accessible during machine operation – a common Malaysian panel design requirement for CE-conforming machine layouts.

Multi-point monitoring: A single FR-PU07 unit can be moved between multiple FREQROL inverters during commissioning – the same physical unit configures one inverter, stores a parameter backup, moves to the next unit, restoring a standard parameter template across all drives in a Malaysian machine installation.

Applications in Malaysian Manufacturing

Malaysian system integrators and machine builders use the FR-PU07 in three standard scenarios:

Commissioning: New FREQROL inverter installations require parameter setting for motor nameplate data, acceleration/deceleration ramp, V/f characteristic, and PID settings. FR-PU07 provides direct parameter entry without laptop or software, accelerating commissioning on Malaysian production floor where PC access to the inverter USB port is impractical.

Parameter backup for preventive maintenance: Malaysian plant maintenance teams in palm oil mills, rubber processing, and F&B manufacturing backup FREQROL parameters annually using FR-PU07 – a precautionary measure that enables rapid replacement without recommissioning delay when an inverter fails during production hours.

Replacement inverter pre-loading: Malaysian Flextech-sourced replacement FREQROL units can be pre-loaded with the failed inverter’s parameter backup (stored on FR-PU07 during last maintenance) before dispatch, enabling hot-swap replacement with zero parameter entry time on site.

Genuine OEM FR-PU07

The Mitsubishi FR-PU07 from Flextech is genuine Mitsubishi Electric OEM product with valid serial number, CE marking, and Mitsubishi Electric Malaysia warranty. Third-party compatible parameter units exist in the Malaysian market – these may not fully support all parameter copy functions across all FR-series generations and do not carry Mitsubishi Electric warranty.

How to Order

Flextech provides FR-PU07 quotations within 24-48 hours. Contact Flextech with the target FREQROL inverter series (FR-D700 / FR-E700 / FR-A800 etc.) to confirm FR-PU07 compatibility. Same-day Klang Valley dispatch on in-stock units.

For the compatible inverter range, see [Mitsubishi inverter Malaysia](/product-category/inverter-mitsubishi/). For the full FREQROL product family, see [Mitsubishi FREQROL inverter series](/product/mitsubishi-freqrol-inverter-series-malaysia/).

FR-PU07 FAQ

Which Mitsubishi FREQROL inverters is the FR-PU07 compatible with?

FR-D700, FR-E700/E800, FR-A700/A800, FR-F700/F800, FR-Z720S. Not compatible with FR-E500 or FR-A500 (use FR-PU04 for those). Connect via PU port (RJ45).

What is the parameter copy function on the FR-PU07?

Reads all parameters from a source inverter into FR-PU07 internal memory, writes to a replacement unit – eliminates manual re-entry during inverter swap on Malaysian production lines.

Can the FR-PU07 be remotely mounted in a control panel?

Yes. Up to 20 m RJ45 cable from the inverter PU port. Mounts to panel door cutout using optional FR-PU07 front bracket for operator access without opening the drive cabinet.

What is the price of the Mitsubishi FR-PU07 in Malaysia?

Approximately RM 350-650, subject to stock. Contact Flextech for current pricing – same-day Klang Valley dispatch on in-stock units.